|
|
|
#1
|
||||
|
||||
Fuel Filter Water Sensor
On my 2008 Mercedes Benz E320 Bluetec my fuel filter has a leak on the top. Hoses are OK.
I believe this water in fuel sensor o-ring is cracked: 0159970745. Can anyone tell me the diameter of this o-ring? Thanks
__________________
Nyck - TX - USA |
#2
|
||||
|
||||
Can't help you with the O-ring diameter. If it is removable, take it off and go to your local hardware store with it......they should be able to help you find a suitable substitute. Oh the other hand, does a new ring come with a new filter? If so, I think I would just bite the bullet and buy a new filter. Trust me, small fuel leaks can turn into "stuck on the side of the road" issues very quickly
__________________
2012 Mercedes ML350 Bluetec 91K (hers) 2005 Corvette 55K (fun car) 2002 VW Jetta TDI 231K (mine) 1998 Volvo S70 T5 Turbo 196K (kids) 1994 Ford F150 4WD 249K (firewood hauler) 1983 Mercedes 300D 376K (diesel commuter) |
#3
|
||||
|
||||
Quote:
In face of it, I also believe the best idea is to change the filter because most of new filter comes with new o-rings. I try to buy new o-rings at Autozone but these kind of stores does not sale this kind of parts for Mercedes. Thanks for your reply.
__________________
Nyck - TX - USA |
#4
|
||||
|
||||
Quote:
I use that a Harbor Freight Metric O-ring assortment and 2 SAE O-ring assortments to limit the amount of driving needed to fined one and the expense of buying only on O-ring. The kits have saved me lots of time and running around. I used one kit yesterday when I did an oil change on my W123 and found the O-rings on the Oil filter Cap tube/stem were so had they cracked off when I removed them. I have also used the various O-ring assortments on faucets and some other small plumbing jobs. Not needed as often but I also have metric and SAE copper washer assortments. I used that twice within the last week. Harbor Freight has metric O-ring assortments and copper washer assortments (don't know if they have metric) and they also have a Viton O-ring assortment but I have not paid attention if it is metric or not. Easy enough to go to their site and check.
__________________
84 300D, 82 Volvo 244Gl Diesel |
#5
|
||||
|
||||
Quote:
About the size I just found out that the size is: ID 15 mm and Section (thickness)is:2.5 mm. As I did not found at my local Autozone I had it ordered and will arrive 11/04/20. I found the ones used in faucets but the closest one was all in standard measurements. I kind of ID 9/16 x OD 3/4 X Section 3/32. I did not think about HF. I hope my problem is only these two o-rings because the leak is getting worse. Thanks everyone.
__________________
Nyck - TX - USA |
#6
|
||||
|
||||
Quote:
__________________
84 300D, 82 Volvo 244Gl Diesel |
Bookmarks |
|
|