|
|
|
#1
|
||||
|
||||
E320 Fuel Water Sensor
Today I was replacing the two o-rings of the Fuel Filter Water Sensor on my 2008 Bluetec.
I need to know if the knurled knob at the center of the sensor should or should not be tightened down. Also what is the function of that particular knob and the correct name of it. I noticed that there is a small o-ring at the end of it. The o-ring size for the water sensor is: ID 15mm x 2.5mm Tick. Total OD 20mm
__________________
Nyck - TX - USA |
Bookmarks |
|
|