|
|
|
#1
|
|||
|
|||
OM617 Torque Values Rocker Arm
Hello All,
Replaced the valve stem seals on an OM617 and cannot find the torque values for the rocker arm assembly bolts. They are long, 8mm, hex bolts that look like they are supposed to stretch. Thanks, 1982 300D
__________________
Gwizzer '82 300D |
#2
|
||||
|
||||
Rocker Arm Bearing Brackets to Cylinder Head 38 Nm
__________________
84 300D, 82 Volvo 244Gl Diesel |
#3
|
|||
|
|||
Retorqued to 38 Nm. Seems so low but I have no experience with these tapered, stretch bolts.
Thank you for the prompt response. Like an overnight gift. I awake to the answer. Thank You Diesel911 |
#4
|
|||
|
|||
I would make sure that the stretch bolts are not "one time" use. In some applications, they cannot be reused once removed. Good luck!!
__________________
96 E300d |
#5
|
||||
|
||||
Quote:
With the head bolts on a 617.952 that is different. Even they can be reused if you measure the the length and they are still within spec. If not they need to be replaced. Why having access to the service manual is important!
__________________
84 300D, 82 Volvo 244Gl Diesel |
Bookmarks |
|
|