Hey guys,
I’m looking to replace the bearings in my car… I think I’m good with what I have to do with the front wheels, but I’m not sure how to do the rear wheel bearings… Can anyone provide some insight to someone who hasn’t done this job before? Thanks! Your help is really appreciated!!

It has been a long time, but I drove w110 190 gassers for over 30 years. I replaced rear bearings in a couple. I got the parts from the dealer. Off came the wheels and brakes. There must have been some sort of flange that held the axle in, but I don't exactly remember and the factory manual is a little vague with out have a car to look at. I rented a slide hammer that fastened with the wheel bolts. I pulled out the axle and took it to a local to a local machine shop for bearing removal and replacement. Install was the reverse of removal. That factory manual shows a ton of special tools, but I was able to do it with regular hand tools. I remember it being a lot of work.

Yeah, I figured it’d be a lot of work! The rear bearings are the type that have to be pressed in? Do you possibly have a picture of the page of the FSM in question? I do not have the manual, nor have I been able to find one… Thank you for your input!!

You might look and see if there is a youtube video.

I think you can find a parts break down and numbers at this site: https://nemigaparts.com/

__________________
84 300D, 82 Volvo 244Gl Diesel

I don't have an answer to your questions other than a free source for the FSM.
Hope this is helpful

https://www.onlymanuals.com/mercedes/190/mercedes_mercedes_190_mercedes_190_1959_1967_workshop_manual_volume_i


https://www.onlymanuals.com/mercedes/190/mercedes_mercedes_190_mercedes_190_1959_1967_workshop_manual_volume_ii

__________________
78 W116 300SD 'Desert Rose' new as of 01/26/2014
79 W116 300SD 'Stormcloud' RIP 04/11/2022