|
|
|
#1
|
|||
|
|||
O-ring dimension for injection.
My injection pump for diesel engine OM603.963 in W124.
Bosch > PES 6M 55C 320 RS 157 I need to change all O-ring in the pump. But my country the repair too expensive. So,I would liked to know the O-ring dimension to compare to buy in other hand. Instead of by O-ring of the VITON Band. Thanks. |
#2
|
|||
|
|||
How to Attached Thumbnails.
|
#3
|
||||
|
||||
It looks like the O-rings on a wide range of M type fuel injection Pumps on various engines are the same size. See pic for the engines.
606 O-ring size OM606 delivery valve o ring size? My 1995 E300D used MB # 0179974148. It is 15mm ID X 19mm OD thickness from the pic in the thread is about 2.5mm.I used buna rings when I replaced mine, they have been fine for 8 years / 75K mile https://injectionpumps.co.uk/product/mercedes-delivery-valve-o-rings/
__________________
84 300D, 82 Volvo 244Gl Diesel Last edited by Diesel911; 07-04-2021 at 04:57 PM. |
#4
|
|||
|
|||
Quote:
Which exact o-ring do you need? I have the Bosch EPC and can look up exact part numbers for all of them, as there are a lot. |
#5
|
||||
|
||||
Quote:
Some peoplep want to use Viton as was sold by the out of business places like greasecar. Hence the need for the dimensions.
__________________
84 300D, 82 Volvo 244Gl Diesel |
#6
|
|||
|
|||
Quote:
It's not a site, it's software installed in a virtual machine. If anyone wants it, I can dm it to them. |
Bookmarks |
|
|