|
|
|
#1
|
|||
|
|||
OM606 - Head Gasket Job - What the seal is this?
I ordered a head gasket kit that has a couple seals I do not recognize right away.
I think the rubber o-ring may be for the coolant pipe at the rear driver side of the head but I can't place the metal seal. Any OM606 experts that would mind pointing me in the right direction? Any help would be hugely appreciated. |
#2
|
|||
|
|||
Chain tensioner?
|
#3
|
|||
|
|||
Black o ring you are correct. If you had removed the part the coolant pipe inserts into the aluminum crush washer seals that part.
__________________
92 e300d2.5t 01 e320 05 cdi 85 chev c10 |
#4
|
|||
|
|||
I thought so too but incorrect; it’s smaller in diameter than the chain tensioner. |
#5
|
|||
|
|||
Quote:
So the same fitting where the black o ring goes? Or is there another coolant pipe? Apologies…. I want to be clear. Thank you! Sent from my iPhone using Tapatalk |
#6
|
|||
|
|||
There are several temperature sensors and the fitting where the o ring goes that it will fit.
__________________
92 e300d2.5t 01 e320 05 cdi 85 chev c10 |
#7
|
|||
|
|||
Cool, thank you.
I don’t think I pulled all of the sensors before taking it to machine. That would explain why I didn’t see it. Much appreciated. Sent from my iPhone using Tapatalk |
Bookmarks |
Thread Tools | |
Display Modes | |
|
|