Modify front driver side window motor
I'm having a real bad time trying to find a window motor for the front driver side. I did think that a 85 motor would work on my 84 190d, but the cog on the motor shaft was not long enough to connect with the groves in the regulator https://speedtest.vet/. After I sent the motor back I thought, what if I could pull the cog on the motor shaft up enough to fit in the regulator grooves. I think there was enough space to do this. Any body think this might work?
|
You did not say what was wrong with the original motor.
I had the passenger sided front motor freeze up due to sticky crud in the read bearing/bushing. Taking it apart and getting the bearing off of the shaft an cleaning and lubing what needed to be lubed fixed it. |
Also, there is a reed switch that gets deformed from holding the button too long… cleaning, or bypassing it may fix the original.
|
Quote:
|
All times are GMT -4. The time now is 02:03 AM. |
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2024 Pelican Parts, LLC - Posts may be archived for display on the Peach Parts or Pelican Parts Website