|
|
|
#1
|
|||
|
|||
350 SDL heads on a 300 TD engine
The heads on my '91 350 SDL need repair. The engine was replaced with a 300 TD engine, after the 350 developed a knock. So I have a 350 SDL with a 300 TD engine.
Can I use the 350 head on the 300 engine? My understanding of the engines is that the 300 was stroked and bored to get the 350. I would think that the 350 head shuld be a bolt on swap. When I did the engine swap I had no issues. Anyone see any issues with a swap of heads? |
#2
|
|||
|
|||
Yes they are interchangable.
__________________
92 e300d2.5t 01 e320 05 cdi 85 chev c10 |
#3
|
|||
|
|||
Thanks for the reply. Do you know offhand if the 350 has larger valves?
|
#4
|
|||
|
|||
Valves are the same size. Cam shaft is improved on the 350s 2 more hp.
__________________
92 e300d2.5t 01 e320 05 cdi 85 chev c10 |
#5
|
|||
|
|||
Again, thank you.
|
#6
|
|||
|
|||
Head off the 350 is far superior. In combination with the 3 liter engine block The pair are almost bulletproof.
Actually in my mind also increases the value of the vehicle. If I ever had a car with the 3.5 diesel engine. I would buy a three liter lower block and keep it in storage. |
#7
|
||||
|
||||
Quote:
__________________
[SIGPIC] Diesel loving autocrossing grandpa Architect. 08 Dodge 3/4 ton with Cummins & six speed; I have had about 35 benzes. I have a 39 Studebaker Coupe Express pickup in which I have had installed a 617 turbo and a five speed manual.[SIGPIC] ..I also have a 427 Cobra replica with an aluminum chassis. |
Bookmarks |
|
|