So upon startup in the 617 non turbo, when oil is cold, it will pressurize oil filter housing so much that it blows a 25 ft. Jet stream of oil via blowing the Oring out of the side of the canister. Canister lid studs are fine, nuts are not over or under torqued, there is a ridiculous build up of pressure for some reason. Correct weight oil, new mahn oil filter and o ring running 15w-40 rotella. Any ideas?

__________________


dieselishquestions@gmail.com
1983 300SD
1983 300GD

Well, the filter system is a pretty basic in/out circuit. Sounds like the “in” part is working okay.

Take a look at this diagram. You may have a blockage.

__________________
1981 240D 4sp manual. Ivory White.

Yeh I thought it might be a check valve.

__________________


dieselishquestions@gmail.com
1983 300SD
1983 300GD

That check valve is for the bypass (fine-filtered) flow, which is quite low compared to the primary filter.

Did this problem start concurrent with the last oil/filter change?

__________________
When cryptography is outlawed, bayl bhgynjf jvyy unir cevinpl.

It may have, why do you ask. Watcha thinkin'

__________________


dieselishquestions@gmail.com
1983 300SD
1983 300GD

Go back to the diagram. Item a is the thermostat and the item listed as a star valve is a is the oil filter housing pressure relief valve (supposed to allow oil flow by bypassing the oil filter if the oil filter got plugged). I am not sure if one of those could block off the oil flow.

Also, there is supposed to be an oil pressure relief valve in the oil pump.

Some filters have been known to come with a thin O-ring compared to others.

I did write this one.

__________________
84 300D, 82 Volvo 244Gl Diesel

Are you sure you't don't have a foreign object under the filter lid?

__________________
When cryptography is outlawed, bayl bhgynjf jvyy unir cevinpl.

Or stuck in the central pipe where oil gets returned? How would you check that?Maybe suck on it?

__________________
Graham
85 300D,72 350SL, 98 E320, Outback 2.5

Yes nothing obvious.

__________________


dieselishquestions@gmail.com
1983 300SD
1983 300GD

Cover is backwards.

__________________
'85 300D Cal 280,000 miles
'14 GLK 350 60000 miles

Don't think the cover will even go on backwards on my '85. I have learned to check which way the Mercedes Benz (or whatever it says) is facing before removal

__________________
Graham
85 300D,72 350SL, 98 E320, Outback 2.5

Pretty sure it’s symmetric.

__________________
1981 240D 4sp manual. Ivory White.

Pics?

__________________
John HAUL AWAY, OR CRUSHED CARS!!! HELP ME keep the cars out of the crusher! A/C Thread
"as I ride with my a/c on... I have fond memories of sweaty oily saturdays and spewing R12 into the air. THANKS for all you do!

My drivers:
1987 190D 2.5Turbo
1987 190D 2.5Turbo
1987 190D 2.5-5SPEED!!!

1987 300TD
1987 300TD
1994GMC 2500 6.5Turbo truck... I had to put the ladder somewhere!