OM606 FSM or injector half torque
 

Does anyone have a link to pdf of the FSM for OM606 Turbo?
Torque specs to the injector halves would suffice for now as well.



OM603 injector halves were around 70nm, same for injector into head.


I have seen 40nm as the spec for the 606 turbo injectors into the head, but wasn't sure if it's the same for the injector halves to each other.


Thanks.

I found an FSM and indeed the torque of the injector halves are 70-80NM.


The torque into the head with the completed injector is 40NM so they are different specs.