Banjo fitting needed
 

Hi folks, I need to replace the banjo fitting that goes on the top of the spin on fuel filter housing. It is the one with the small barb that the injector return hose connects to. That little barb broke off flush with the banjo fitting. Can someone give me a part number or any idea where I could get one

Thanks in advance.

Someone likely has a used one.

Pm me your info...

In a pinch, I have brazed or silver soldered copper tubing onto those banjo fittings in this exact scenario. Just stick it in the vise and drill it to a size that barely clears the tubing, then solder/braze.

There is no pressure in the return line so an actual barb is not needed.