|
|
|
#1
|
||||
|
||||
part help for AC receiver/drier aux fan trigger switch
Hi,
My aux fan was busted, so I have fixed it, but believe there are some issues with the wiring that switches it on. When I jumper the wires, after a few seconds it starts up. However, jumpering doesnt always get it to go easily, because the wires are rather corroded. Also, Im not sure of the condition of the resistor (little white rectangle) that is in the system. Any info on the part numbers or what I could get from fastlane to fix this is most appreciated, as Id like to get an order out to them today. Thanks very much, JMH
__________________
Current Diesels: 1981 240D (73K) 1982 300CD (169k) 1985 190D (169k) 1991 350SD (113k) 1991 350SD (206k) 1991 300D (228k) 1993 300SD (291k) 1993 300D 2.5T (338k) 1996 Dodge Ram CTD (442k) 1996 Dodge Ram CTD (265k) Past Diesels: 1983 300D (228K) 1985 300D (233K) |
#2
|
||||
|
||||
nevermind
nevermind, just talked to Phil at fastlane and we went over the parts... Now Im going to just try to clean it up. Any advice for doing that so that the fan will turn on would be appreciated at the thread pertaining to that topic.
Thanks JMH
__________________
Current Diesels: 1981 240D (73K) 1982 300CD (169k) 1985 190D (169k) 1991 350SD (113k) 1991 350SD (206k) 1991 300D (228k) 1993 300SD (291k) 1993 300D 2.5T (338k) 1996 Dodge Ram CTD (442k) 1996 Dodge Ram CTD (265k) Past Diesels: 1983 300D (228K) 1985 300D (233K) |
Bookmarks |
|
|