|
|
|
#1
|
|||
|
|||
maint./prevent. maint
My 81 300SD is due for some maint. work.
With 315.000 km and no service record (or manual) should I be looking at replacing nozzles? Lately, after about an hours highway driving, there appears to be some rough idling when pulling to a stop. Had the valves set when I bought the car at about 287.000km. Any input is appreciated. Enjoying this forum a lot Cheers |
#2
|
|||
|
|||
That appears to be about 20K miles... so you are probably due for another valve setting...
and if you will check these sites , plug in your car... you can see if there are known problems and solutions listed in TSBs.... http://www.nhtsa.dot.gov/cars/ http://www.alldata.com/recalls/index.html I think there are some specifically idle related,older car fixes listed... |
Bookmarks |
|
|