|
|
|
#1
|
|||
|
|||
fuel line question
hello all, i have a 97 e300d and want to replace the o rings on the hard fuel pipes that go into the intake. i already had the o rings replaced on the hard pipe ends that go into the injector pump but i need to replace the o rings on the other end of these lines. i parked nose down in my driveway the other night and discovered a good size puddle of fuel running down the driveway the next morning. i pulled up half of the black plastic cover over the intake and peeked in there and the ports that these lines run into were full of fuel. what parts do i need and what is a good source for the parts. thanks in advance. jim
|
#2
|
|||
|
|||
let me rephrase that
sorry about the wacky description in my original post. upon further investigation i found that it is the injector ports that are full of fuel, all 6 of them. what should i replace? thanks jim as you can tell i am a deisel newbie but i am loving these things. 97 e300d
|
#3
|
|||
|
|||
You need ~1.2 meters of new fuel return line. Sounds like they are leaking.
Don't loose the metal plug at the end of #6.
__________________
Terry Allison N. Calif. & Boca Chica, Panama 09' E320 Bluetec 77k (USA) 09' Hyundai Santa Fe Diesel 48k (S.A.) |
#4
|
|||
|
|||
thank you very much T M. those would be the braided ones i take it? jim
|
#5
|
|||
|
|||
Correct.
__________________
Terry Allison N. Calif. & Boca Chica, Panama 09' E320 Bluetec 77k (USA) 09' Hyundai Santa Fe Diesel 48k (S.A.) |
Bookmarks |
Thread Tools | |
Display Modes | |
|
|