|
|
|
#16
|
|||
|
|||
I replaced mine with the aluminium bodied rebuild from Randy at European Parts Specialists. It seems to be working fine. The old one had a big crack in the side of it which was visible once it was removed. It took about 45 minutes to an hour to do the switch.
The hoses looked like standard heater hoses to me. I disconnected the hoses, not at the servo itself but where they mated with a solid pipe away from the servo. With the exception of the short hose going to the aux water pump which I disconnected right at the servo. It seemed easier to get the hoses off away from the servo rather than in the tight spot right at the base of the servo.
__________________
1977 300d 70k--sold 08 1985 300TD 185k+ 1984 307d 126k--sold 8/03 1985 409d 65k--sold 06 1984 300SD 315k--daughter's car 1979 300SD 122k--sold 2/11 1999 Fuso FG Expedition Camper 1993 GMC Sierra 6.5 TD 4x4 1982 Bluebird Wanderlodge CAT 3208--Sold 2/13 |
Bookmarks |
Thread Tools | |
Display Modes | |
|
|