|
|
|
#1
|
||||
|
||||
603 AT vacum controller
Has anyone taken apart a 603 AT vacuum controller? I put vac gauge on the modulator lin and I get as much as 3 (inHg?) with the pedal almost to the floor. I understand it should be 0 at this point.
I pulled the vacuum controller for a look. It has about 60-degees of travel. The first third of the travel is loose. Get's me thinking something is worn or broken inside (somekind of genius, huh?). It looks to be held together by 3 really long rivets or tubes with swaged (sp?) ends. I figure I can use bolts or JB Weld if the innards can be fixed. Does anyone have experience with one of these vacuum controllers? I haven't priced one yet. Thanks, Sixto 91 300SE 87 300SDL 83 300SD |
#2
|
||||
|
||||
Nope, but let me know if you open it up, and tell us what's inside! A new one is ~$75 or so via online sources.
|
Bookmarks |
Thread Tools | |
Display Modes | |
|
|