PeachParts Mercedes-Benz Forum

PeachParts Mercedes-Benz Forum (
-   Diesel Discussion (
-   -   Clunking from rear diff area (

aldedmon 06-29-2003 01:51 AM

Clunking from rear diff area
There is a ball joint of sorts that is part of the 5 link system(It is the lower most link and the attachment point is straight down to the ground). These ball joints cause the car to make a click/clunk sound when you accelerate from a stand still. Its the same popping sound that a swivel tilting chair makes when its subjectd to a wide heavy load that hadn't exercised in a little bit. To replace it you have to remove the rear carrier hubs, and although the bearings aren't necessarily damaged at the time, I would caution you to nonetheless replaced them as insurance. I bought the bearing and took them to an indie. He charged me 1 hrs labor for maybe 10 minutes work for punching out the old hub carrier bearing and putting in he new ones . You would be wise to check this ball joint on yours, it cause "clunking" in the rear when you accelerate from a stand still and is easily seen by jacking up th rear and eye balling the balljoint. If its flat and torn, guessed it. :cool:

All times are GMT -4. The time now is 03:11 AM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2021, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2018 Pelican Parts, LLC - Posts may be archived for display on the Peach Parts or Pelican Parts Website