Parts Catalog Accessories Catalog How To Articles Tech Forums
Call Pelican Parts at 888-280-7799
Shopping Cart Cart | Project List | Order Status | Help




Go Back   PeachParts Mercedes ShopForum > Technical Information and Support > Diesel Discussion

Reply
 
LinkBack Thread Tools Display Modes
  #1  
Old 09-12-2003, 01:24 PM
ForcedInduction
Guest
 
Posts: n/a
Rear Transmission Housing

The previous owner did a engine/transmission swap with an SD. They have the electronic speed senders, the TD has a mechanical sender. From what I've been told I need to do is change the rear housing on the transmission to one off a 123 chassis. Change the rear housing and the internal speedometer gear then I can use my TD cable and speedo.

Is this hard to do? How would I get one of these without buying a whole new trnasmission? Could I do this myself or would I have to take it to a shop?

Would it show the correct speed and miles? I'm not sure, but isn't the SD have different gearing?
Reply With Quote
  #2  
Old 09-12-2003, 02:30 PM
R Leo's Avatar
Stella!
 
Join Date: Mar 2003
Location: En te l'eau Rant
Posts: 5,367
I can't remember if the speedo cable goes into the tailhousing or the main body of the transmission. If it does in fact drive from the tailhousing, I'll send you the piece from the dead tranny I have in the garage.

I'll look at it tonight and post tomorrow.
__________________
Never a dull moment at Berry Hill Farm.
Reply With Quote
  #3  
Old 09-12-2003, 05:32 PM
ForcedInduction
Guest
 
Posts: n/a
The old OM617 from a 79' 300D we had in our class had it in the tailhousing roughly 6 or so inches from the flexplate.
Reply With Quote
  #4  
Old 04-24-2006, 01:26 PM
Old300D's Avatar
Biodiesel Fiend
 
Join Date: Apr 2004
Location: Denver, CO
Posts: 1,883
I tried to install a tail housing from a 722.315 (mechanical speedo) into the 722.303 (300SD, electrical speedo). The bolt pattern is roughly the same, but much larger for the 303. It will NOT bolt up. If I want a working speedometer, I will have to find a 722.315 to rebuild, or convert my gauges to run with a 300SD electrical speedo.
__________________
'83 240D with 617.952 and 2.88
'01 VW Beetle TDI
'05 Jeep Liberty CRD
'89 Toyota 4x4, needs 2L-T
'78 280Z with L28ET - 12.86@110
Oil Burner Kartel #35

http://i16.photobucket.com/albums/b1...oD/bioclip.jpg
Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are On
Pingbacks are On
Refbacks are On




All times are GMT -4. The time now is 04:19 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2017, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2011 Pelican Parts - Posts may be archived for display on the Peach Parts or Pelican Parts Website -    DMCA Registered Agent Contact Page