|
|
|
#1
|
||||
|
||||
Replacing fuel neck on W210
Anyone replaced the fuel filler neck on a w210. The neck on my '97 E300 is heavily rusted and it bothers me. I always top off the tank when I refill, so the rusting I'm assuming is due to the previous owners neglect. Anywho, anyone recommend anything else to replace or parts that I will need to replace that neck besides it itself?
I like to get a heads-up here because my local MB parts department never has anyone up front that has a clue....
__________________
#dieselFLEET --------------- '97 E300 '99 E300 |
#2
|
||||
|
||||
I'm pretty sure the neck and tank are one piece.
Gilly |
#3
|
||||
|
||||
__________________
#dieselFLEET --------------- '97 E300 '99 E300 |
#4
|
||||
|
||||
The EPC should show it, but I've got too much going on to look at it this week. Anybody else have theirs handy?
Edit: not to doubt you, Gilly, but you did say "pretty sure" and not "sure."
__________________
Rick Miley 2014 Tesla Model S 2018 Tesla Model 3 2017 Nissan LEAF Former MB: 99 E300, 86 190E 2.3, 87 300E, 80 240D, 82 204D Euro Chain Elongation References |
#5
|
||||
|
||||
I haven't seen an MB sedan yet, with the tank mounted in the front of the trunk (behind the rear seat) that didn't have a 1 piece tank/filler neck.
Gilly |
Bookmarks |
Thread Tools | |
Display Modes | |
|
|