Parts Catalog Accessories Catalog How To Articles Tech Forums
Call Pelican Parts at 888-280-7799
Shopping Cart Cart | Project List | Order Status | Help




Go Back   PeachParts Mercedes-Benz Forum > Mercedes-Benz Tech Information and Support > Diesel Discussion

Reply
 
LinkBack Thread Tools Display Modes
  #1  
Old 09-28-2003, 05:28 PM
84W123DT
Guest
 
Posts: n/a
Vacuum Pump Pressure Reading

84 300D Turbo Diesel

Just bought myself a vacuum gauge and testing it. I took a line off the main supply (off the fat one that goes to the brake booster) and hooked up the gauge. At ide it reads 24 inches and no change at higher rpm (means that the diaphram is good). 18 to 21 inches I read is the normal pressure, is mine set too high and should it be adjusted?

I don't think I have any vacuum problem at this time as I can lock and unlock all doors 4 to 5 times.

Thank you for your expert advise.
Reply With Quote
  #2  
Old 09-28-2003, 05:34 PM
ForcedInduction
Guest
 
Posts: n/a
At the booster line I get about 11-14 inches. It drops as throttle is increased to 0 inches at full throttle. The vacuum valve on the IP creates a "controlled leak" for the transmission, just like a gasser intake manifold looses vacuum with increased throttle.
Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are On
Pingbacks are On
Refbacks are On




All times are GMT -4. The time now is 06:32 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2019, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2018 Pelican Parts, LLC - Posts may be archived for display on the Peach Parts or Pelican Parts Website -    DMCA Registered Agent Contact Page