heater fan does not work with new push button
So I got a new ACC unit today. But my fan does not work at all. The fan worked before. I took it out cleaned it checked brushes. Its good. Checked to see if it was getting power. Its not. What would cause this?
This is in a 85 300D |
Bad fuse. I don't know if there is a separate metal strip fuse for the fan on a W123, but I know there is on the W124 -- the blower stopped running on the TE after I changed the water pump, fuse had cracked.
Peter |
im not sure if there is any other fuses. Im going crazy with this project. I had the dash off replacing vacuum motors. It worked but then the push buttons stopped working. So i got a new one. I can hear it do its thing but i have not power to the blower. I made sure the blower was fine. checked brushes hooked up to power it spun. I pulled the glove box. What is the black box then to the silver box. I know the silver is the temp control.
cooty |
All times are GMT -4. The time now is 01:43 AM. |
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2024 Pelican Parts, LLC - Posts may be archived for display on the Peach Parts or Pelican Parts Website