1992 300D: where are min max marks for coolant

[ktlimq]

I cannot find it on the white translucent tank.

From what I understand, the obvious protruding horizontal seam that encompasses the whole tank is where the coolant should be. Most tanks have an arrow pointing there (Hard to see - white print on a white tank) that says "Kuhlstand". Anything below that is too low.

When the coolant is cold, the level should be very near the level of the rim where the top and bottom halves of the resrvoir are bonded together. Most of mine will usually run 10-20 mm below there.

When hot or even warm, the level will be higher.

Marshall