|
|
|
#1
|
||||
|
||||
HELP! i could use a wheel to frame measurement
Hello all -
i am putting rack and pinion in my MB (w123 sedan) and i have a small concern with my turning radius (im paranoid) - could some one please measure from the frame (there is a few small holes, a square one inparticular on the bottom of the frame in front of the tire) to the CENTER of the tire at full turn rest. i have my own measurements from before the work - but that also is from another conversion were the drag link was dropped...id like to compare it to oem that way i can at least compare it to my situation and change anything if need be.... thanks a lot everyone! Jake PS this was posted in hotrods |
Bookmarks |
|
|