|
|
|
#1
|
||||
|
||||
valve adjustment difficulties
i am in the middle of adjusting my valves and am currently stuck on #7. it seems like its just spinning and i cannot get the gap to change. has anyone else had this problem and if so how did you solve the problem?
|
#2
|
||||
|
||||
That's when you need the third wrench. See the picture below, borrowed from Performance Products. Some people have reported being able to stick a screwdriver in there to hold the spring collar.
__________________
Rick Miley 2014 Tesla Model S 2018 Tesla Model 3 2017 Nissan LEAF Former MB: 99 E300, 86 190E 2.3, 87 300E, 80 240D, 82 204D Euro Chain Elongation References |
#3
|
||||
|
||||
the big nut?
the part right under the adjustment nuts that looks like a giant nut?
|
#4
|
||||
|
||||
Yep.
__________________
Rick Miley 2014 Tesla Model S 2018 Tesla Model 3 2017 Nissan LEAF Former MB: 99 E300, 86 190E 2.3, 87 300E, 80 240D, 82 204D Euro Chain Elongation References |
#5
|
||||
|
||||
thanks
THANK YOU SO MUCH!!!!!!!
|
#6
|
|||
|
|||
Using a screwdriver to jam it in place works fine for me.
|
#7
|
||||
|
||||
done
its done look under the post"i did it"
|
#8
|
|||
|
|||
Ok,, just for reference for others in the future who find this thead... or do a search ....
The valve adjustment on these old overhead cam diesels is done by adjusting the position of a nut which is threaded on the actual valve.... the valve has a slot in it and a wider nut at the bottom of the adjustment stuff but above the valve seals...has a tang which fits into this slot..... it can rotate with the valve rotators fitted in most of these engines.. but allows a way to ' clamp ' the valve rotation for adjusting purposes... In the event that the top nut or the next lower nut ( which is used to lock the top nut at the proper height ) are stuck... the wider, slotted nut is used to hold the valve from rotating so the upper two can be set and locked together... That is why you sometimes see people post saying that they have never had any problems and don't need any way to hold the lowest nut. But , IF just ONE valve adjuster nut is STUCK.. then you need that lower one to get it loose enough to move. Most people find that the bought lower wrench, due to it haveing a ' stand' which holds it at about the right position.. plus some combination of to bent wrenches ( I got Crasftsman and bent them myself ( being cheap ) are very helpful for doing the valve adjustment.... But I bought the lower one after trying and failing to make it ... I am sure we will have several posts now saying basically " you wimps" ' I have always used plain wrenches and have never needed to hold the bottom nut'..... LOL |
#9
|
||||
|
||||
No name calling needed....
I'm just going to say I guess I've been lucky that I haven't needed the 3rd wrench. Yep, I've simply used a home bent set of old 9/16 wrenches to do the deed. I'm glad I carefully read the replies so in case in the future I get a stuck nut, I can just jam a screwdriver into the lower collar.
__________________
DJ 84 300D Turbodiesel 190K with 4 speed manual sold in 03/2012 |
#10
|
|||
|
|||
Thanks for not calling me any names.....
|
#11
|
||||
|
||||
i just use a crecent wrench to hold it.
|
#12
|
||||
|
||||
Don't worry leathermang, I never will...
__________________
DJ 84 300D Turbodiesel 190K with 4 speed manual sold in 03/2012 |
#13
|
||||
|
||||
Since we are on the subject of valve adjustments, I recently adjusted the valves on my '76 300D. It now starts much easier, which I can understand. What I find amazing is that prior to the valve adjustment, It would billow white smoke on cold startup. Since the valve adjustment, no smoke. Could someone explain this to me? What is the principal behind this?
__________________
83 W123 240D 76 300D, "Lil Yellow Car" 1978 Cessna 172N 180 HP Mod "If life ain't fun, I'm not interested" The important things are those that you learn after you know it all. Chip Foose Build a better mousetrap and you will REALLY infuriate corporate america. |
#14
|
|||
|
|||
Sure
The easy explanation might be that you've increased the cold compression. If a valve was tight-then it might have had a combustion chamber with lower compression which would either be unburnt, or semi-burnt fuel. Michael
__________________
Michael McGuire 83 300d 01 vw A4 TDI 66 Chevy Corsa 68 GMC V6 w/oD 86 300E |
#15
|
||||
|
||||
OK that makes sense. All the valves were tight.
__________________
83 W123 240D 76 300D, "Lil Yellow Car" 1978 Cessna 172N 180 HP Mod "If life ain't fun, I'm not interested" The important things are those that you learn after you know it all. Chip Foose Build a better mousetrap and you will REALLY infuriate corporate america. |
Bookmarks |
Thread Tools | |
Display Modes | |
|
|