|
|
|
|
|
#1
04-26-2004, 01:01 AM
|
||||
|
||||
|
Can you stand another window regulator question?
My dirvers side window, though attached to the regulator, slides down into the door. I was feeling around inside the door and couldn't find anything that felt broken. Looking at a photo of the regulator is not giving me any more understanding.
Where do these things fail?
__________________
1983 300td 240k (down with bad tranny) 1984 300d 222k (daily driver) "Olive" 1997 GMC K2500 105k (sled dog limo) "The scenery in ANWR is as spectacular as the Grand Canyon and the wildlife is more impressive." 
|
|
#2
04-26-2004, 01:52 AM
|
|||
|
|||
|
Take the door panel off and look around, maybe.If you do a search under 126 door panel it shows some typical Mercedes pics of the removal.
__________________
'84 300SD veg-oil bliss '83 300SD veg-oil beater
|
|
#3
04-26-2004, 01:12 PM
|
|||
|
|||
|
One of the more common places these fail if that pin on the sliding part on the bottom channel, that attaches the arm. It comes loose or breaks.
Those pins are available through the usual MB sources. A little tough to get to, but it is really just a big rivet, with a plastic part on the end of it. Hammer the end while holding a backing plate on the back side, unless you have riveting tools.
|
|
#4
04-26-2004, 03:00 PM
|
||||
|
||||
|
Old Dies
Do you think this kit is the repair for what you're talking about?
__________________
1983 300td 240k (down with bad tranny) 1984 300d 222k (daily driver) "Olive" 1997 GMC K2500 105k (sled dog limo) "The scenery in ANWR is as spectacular as the Grand Canyon and the wildlife is more impressive."
|
|
#5
04-26-2004, 05:18 PM
|
||||
|
||||
|
Well I'll be damned... Do they make these kits for the 201? That white plastic part looks like what broke on my back window regulator!
__________________
1984 190D 2.2 Auto 220k 2001 Jeep Cherokee Sport 70K 2004 Lexus RX-330 ??K 2005 Chrylser Crossfire LTD 6K Play guitar? Go to www.cyberfret.com for free online lessons!
|
|
#6
04-26-2004, 07:33 PM
|
||||
|
||||
|
That doesn't look like the kit for the sliding jaw that usually breaks. The one that usually breaks is (if you look at the image on the original post) located on the "goldish" colored bar on the right upper corner of that image, it's the "lower" jaw on that bar in the image.
Gilly
__________________
Click here to see a photo album of my '62 Sprite Project Moneypit (Now Sold)
|
 |
| Bookmarks |
|
|
Linear Mode
