|
|
|
#1
|
||||
|
||||
lower molding installation
I am trying to install the lower door moldings on my 87 300D. I ordered all new clips from performance products. They look identical to the OEM clips. I am placing them in the molding track with the dowel pin still extended, then pressing inward. Only about half of them are holding. I have already broke some. Sometimes they won’t stay in the door and some won’t clip to the molding. The front fender piece worked fine, it’s the doors that are giving me trouble. Any one done this? What am I doing wrong? These are the lower moldings, at the bottom of the doors.
Thanks, Brian
__________________
Brian 87 300Dturbo 180K #14 head still running R-12 SOLD 12/2017 02 F350 Powerstroke 180K 05 Chevy Express 1 ton w/Royal Utility box 120K 08 Infiniti FX-35 40K 15 Golf Sportwagen TDI 35K 10 Sprinter 3500 chassis with a Class A Winnebago on it. 56K |
#2
|
||||
|
||||
I only use OEM when it comes to moulding fasteners
__________________
79 240D my current toy 42 years a Diesel addict 240D sold 250SE sold 220D sold 280C sold 280S sold 300D (2) sold 300CD sold 300DT sold 300SD sold 380SL sold |
Bookmarks |
|
|