602 CYL HEAD INFO
 

I AM REPLACING A 602 CYL HEAD AFTER HAVING IT STRAIGHTENED AND MILLED. DO I NEED A SPECIAL THICKNESS HEAD GASKET AFTER HAVING THE HEAD MILLED? I BELIEVE I KNOW HOW TO TIME THE CAM AND CRANKSHAFT, BUT I NEED TO KNOW HOW THE BEST WAY TO CHECK TIMING BETWEEN THE INJECTION PUMP AND THE CRANKSHAFT.
THANKS,
BRAD



------------------
BRAD FRANCIS
1986 190D 160,000 mi.
SUMNER, TX
bfrancis@1starnet.com

I could be wrong, but I dont think you are supposed to mill those heads. I would do some checking before mounting and possibly killing the whole engine.

Doc?
Steve?

------------------
Benzmac:
Donnie Drummonds
300E
ASE CERTIFIED MASTER AUTO TECHNICIAN
MERCEDES SPECIALIST 8 YRS
PARTNER IN MERCEDESSHOP.COM
OWNER OF MB AUTOWERKS .COM

Benzmac,

The head was actually straightened then milled a few thou. The camshaft bearings are straight. Is it the camshaft bearing alignment that concerns you, or is it valve to piston clearance or such?

The fellow who did the machine work is very well thought of, trusted, and recommended, and has done scads of Mercedes heads.

Glad to hear your crankin' out work with, or rather faster than the best of 'em.

Thanks,

------------------
Larry Bible
'01 C Class, Six Speed
'84 Euro 240D, 523K miles
'88 300E 5 Speed
'81 300D Daughter's Car
Over 800,000 miles in
Mercedes automobiles