tranny fluid change...???
I think I can figure out how to drain everything including the convertor. What about the refill procedure? Just button everything back up and start dumping fluid down the dipstick? I guess the convertor will refill itself when I start the car?
|
Pretty much.... a funnel really helps hit the dipstick tube....yes, TQ will refill itself. So you will have to fill, start, check, adjust....don't leave it too high or too low.
|
Uh yeah but please remember to put in 3-4 quarts and then start the engine - this will fill the torque converter with fluid. If you just dump the 7-8 quarts directly in without doing this you will have a bit of a mess on your hands.
Don't ask me how I know... |
As I remember...
I think I poured in the first 6 (? been awhile) quarts and then started topping off.
It doesn't take much to move up the stick so go slowly with the last half quart. |
All times are GMT -4. The time now is 07:07 PM. |
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2024 Pelican Parts, LLC - Posts may be archived for display on the Peach Parts or Pelican Parts Website