PeachParts Mercedes-Benz Forum - #315 GERMAN Higher Flow Nozzles, 2 sets left

PeachParts Mercedes-Benz Forum (http://www.peachparts.com/shopforum/)

- Diesel Performance Tuning (http://www.peachparts.com/shopforum/diesel-performance-tuning/)

- - #315 GERMAN Higher Flow Nozzles, 2 sets left (http://www.peachparts.com/shopforum/diesel-performance-tuning/366944-315-german-higher-flow-nozzles-2-sets-left.html)

#315 GERMAN Higher Flow Nozzles, 2 sets left

Hello,

I had three (3) sets of #315s, German Made-German Quality, nozzles for OM617 applications.

I pre-sold one set.

I have two more sets for sale.

Please PM me, since it's first pay first in line.

No long delays waiting for these to get to me as they are in-hand currently.:D

A little sloppy today. Includes Service (install), pop testing, balancing, et cet.

OK, down to one (1) set left.

Hi Greazzer,

How much per set?

Sincerely,

Packman

I will need your rebuidable cores, full service, pop testing, balancing, shipped CONUS with 5x HS 10mm oriface and 1 meter of return line is $299 shipped, and I will toss in one performance spring for the OFV. The latter assumes you have a rebuildable OFV, which virtually all OM617's have.

Service only pricing has remained the same for 2014 & 2015 at $99.00 shipped CONUS if you supply you own nozzles and no HS or RL. Finding German made #315s may be tough, but if you can find them cheaper, then go with the service only.

I tried these since you don't need a minimum order at the time I ordered them a few years ago. At $3.60 per nozzle what could go wrong. LOL ... plenty. They started to pee around the 100th pop during my R&D. A waste of $37 bucks. Now, it says minimum order is 30 nozzles. Nozzle DN0SD315 [0 434 250 177,0434250177] - US$3.60 : StarsDiesel

Quote:

Originally Posted by greazzer (Post 3462714)

I have not had a chance to run the nozzels from my source yet, but now that it is warm, I will soon. I want to swap out the PCs at the same time as I do not have much free time to play with this stuff these days.

I still have 3 nozzles if you wanted to play with one to compare with the StarDiesel one.

Hi Dave, if you want, ship away. I found some odd ball nozzles I plan on tinkering with shortly. I am even working on my AAZs. I figured out how to set them.

Got any nozzles for 606 turbo on a 1999 e300d? If I end up keeping the car I'm going to grease it out soon. I like to start with fresh nozzles. Car runs perfect as is. It'd be interesting to see how the nozzles are.

Thanks

Although I should know this by now, I think you take #310s. None on hand, except some nice used Germans.

All sets gone now... Thanks Everyone. New Order being placed.