|
|
|
|
|
LinkBack | Thread Tools | Display Modes |
#1
|
||||
|
||||
FOR SALE: My costly mistake selling on the cheaps - INTAKE Manifold
This is a modified intake manifold which will fit an OM616 engine or similar engine applications. IT WILL NOT FIT INSIDE A W123 because the manifold rises too high. This part number is 621 ...
The enlarged air intake is 60mm which is the same as the W115 300D long runner. Professionally machined, new freeze/welsh plugs, and the new pipe was correctly machined on the inside to not restrict any airflow. There is a tiny crack at the base of the tube, but the tube covers the crack. I can (or you can) drill a small hole at the foot of the crack and JB Weld the hole/crack. Crack is around 5mm long. I need the 615 141 02 01 Manifold for the OM616 engine, which will fit inside a W123. Willing to swap this manifold for the "correct" one or selling this one. I am selling my costly mistake on the cheaps, $50.00 plus whatever shipping is. For overseas sales, let me know and I can put this on Ebay and it will ship overseas on the supercheaps. I will add 10% to cover the Ebay fees. |
#2
|
|||
|
|||
Hi greazzer,
Do you still need to acquire the 615 141 020 01 intake manifold? I was at the Oakland Pick-n-Pull today looking for parts for my W116 and I saw one there. The air cleaner was pulled off and two of the 4 nuts securing it to the cylinder head were taken off. Let me know if you would like me to pull it for you.
__________________
78 W116 300SD 'Desert Rose' new as of 01/26/2014 79 W116 300SD 'Stormcloud' RIP 04/11/2022 |
#3
|
||||
|
||||
Howdy,
No, I found one over on S T D dot com Thanks for looking !!!!! |
#4
|
||||
|
||||
Gone ... thanks !
|
Bookmarks |
Thread Tools | |
Display Modes | |
|
|