|
|
|
#1
|
|||
|
|||
1983 Mercedes 240d Shakes like a massage chair
I have recently picked up a 1983 Mercedes 240d w123. I have been going through the basics and can't seem to improve or slow down a crazy vibration problem. I have replaced all 3 motor mounts, trans mount, adjusted the valves and have replaced all 4 fuel injectors(injectors were leaking). Nothing has seemed to make any type of improvement. My question is, is there a certain procedure for installing new mounts on this car? I have seen many posts that ask if they were installed with the car lifted in the air or sitting on the ground, does it make a difference? I would also like some advise on the type of mounts that should be purchased if the OEM are not available. Any help would be greatly appreciated.
|
#2
|
||||
|
||||
Give up the dope. When does it vibrate?
__________________
Junqueyardjim Christianity, if false, is of no importance, and if true, of infinite importance. The only thing it cannot be is moderately important. C.S. Lewis 1983 Mercedes W123 240D 4 Speed 285,000 on the road with a 617 turbo, beautiful butter yellow, license plate # 83 240D INDIANA 2003 Jaguar Type X, AWD. beautiful, good mileage, Mom's car, but I won't let her drive it! |
#3
|
|||
|
|||
Duplicate thread is in Diesel Discussion - problem solved on post # 17
83 240d W123 Shakes like a massage chair.
__________________
78 W116 300SD 'Desert Rose' new as of 01/26/2014 79 W116 300SD 'Stormcloud' RIP 04/11/2022 |
#4
|
|||
|
|||
Change your rack damper bolt
|
#5
|
||||
|
||||
Unfortunately 240Ds don't have a rack damper bolt.
__________________
84 300D, 82 Volvo 244Gl Diesel |
Bookmarks |
|
|