PeachParts Mercedes-Benz Forum - Pulling a om606 from a w210 special tools?

PeachParts Mercedes-Benz Forum (http://www.peachparts.com/shopforum/)

- Diesel Performance Tuning (http://www.peachparts.com/shopforum/diesel-performance-tuning/)

- - Pulling a om606 from a w210 special tools? (http://www.peachparts.com/shopforum/diesel-performance-tuning/406010-pulling-om606-w210-special-tools.html)

Pulling a om606 from a w210 special tools?

I'm going to be pulling a om606 from a 98 e300 away from my shop. I've got very little w210 experience. When I pulled the 717.668 6 speed from the w203 i completely lucked out and a 1/2" 12 point fit the E torx(inverted torx) head trans bolts and an Allen fit the big regular torx flywheel bolts. Can anyone tell me what size
E torx I'll need and regular torx would be nice too. I'm gonna pick up a e torx set, theres a
E10, E11, E12, E14, E16, and E18
And a
E6, E7, E8, E10, E12, E14, and E16

I've only got a few torx sockets so I may grab a set of them too.

Sent from my SM-J737A using Tapatalk

Quote:

Originally Posted by rwd4evr (Post 4059661)

Rrrrrrr. Some ****er beat me to it. Not only that but they ruined the intercooler, broke the double fans setup and took the torque converter and left the trans. Bravo dumb ass. I hope it's got a hole in a piston.

Sent from my SM-J737A using Tapatalk