|
|
|
#1
|
|||
|
|||
92 300CE Distributor Ignition Code 17
Was able to make a little LED setup from a search here.. Was able to read the codes in the DI.. Was surprised I only had one.. I have been working on the 92 300CE I picked up last fall.. The DI will not turn on the check engine light.. but I went to pole 8 on my 16 pole connector and got the code 17.. The book I have on codes says that's a faulty Crankshaft position sensor.. I pulled it and found a little piece of metal on it and cleaned up the conection ... But still got the code.. So ordered a new one.. Any one have some good plans for making an LED setup.. Mine is very crude but works..
Ken |
#2
|
|||
|
|||
Well heck.. After all the work of finding out all the information I could and building the rig to check the codes.. Seems I was lacking one very big piece of information.. The car must be runnig to make this test.. done like the others.. but car must be running..
Thanks to a new fround friend I now have all the information.. Seems you will always get a code 17 if you check it with the engine not running.. A piece of information I could not find any where... I reran the test with the engine. running.. . Seems I now have no codes.. Good news.. I did have to clean the cam sensor connection... but did that earlier.. Looks like the car is in good shape.. No codes.. Ken |
Bookmarks |
Thread Tools | |
Display Modes | |
|
|