Hoist lift point rubber grommets / pads
 

Hello Everyone
Hoist lift point rubber grommets.
Anyone know the MB part numbers ?
Thank you and have a great day.

Are you talking about the rubber pads, like the ones on W124 cars.? If so, i can go look on my TD and see if there is a part number.

yes.

thank you

I am not sure the 123's have those.... they actually show pictures of a ' tool' which sticks into the regular jacking hole.. but then goes down below to stick the ( normal ) car stand on..... I will try to find it in the manual...

He didn't say W123. In fact, he didn't say which model at all! That might help.

all 1985 and newer

all 1985 and newer?????

1985 was the last year of the 123 chasis with OM617 engines. Newer than '85 (1986 and on) was the 124 chasis with the OM603 engine. I'm afraid you're not narrowing this down much. How about telling us the specific car/engine?

There used to be a game called " twenty questions"... that is what this feels like....

W126's had round ones, #126-997-1886

W124's were shaped a bit differently, #124-997-0486

For a 1986 300SDL W126

126 997 18 86

Are they interchangable I don't know

Dave

I would like to thank all of you for your help.
 

Hello Everyone
I have had difficulty getting the part number from the local MB dealer.
There are 87 vehicles needing these at this moment.
It would be silly to attempt to give make, model and year on that many cars.
Some times; you must ask silly sounding questions to get the correct answer.
I would like to thank all of you for your help.

I need one for a 96 E320 (W210). rear if that matters. Phil are you listening?

There is a machined bar with a steel pad on the end for jacking up the car using the jack holes. I can get them from a machine shop I work at for around $100 if anyone is interested.

Pictures please
 

Pictures please!!!

Adam, any pictures of this tool yet?