Parts Catalog Accessories Catalog How To Articles Tech Forums
Call Pelican Parts at 888-280-7799
Shopping Cart Cart | Project List | Order Status | Help



Go Back   PeachParts Mercedes-Benz Forum > Regional Forums > Great Plains & Rocky Mountains - US (CO,IA,KS,MO,MT,ND,NE,SD,WY)

Reply
 
LinkBack Thread Tools Display Modes
  #1  
Old 03-13-2001, 06:50 PM
Registered User
 
Join Date: Feb 2001
Location: BC, Canada
Posts: 378
Colorado

I have had my car into Landi German Auto Repair in
Parker, Colorado twice, (phone 303-841-9558). Both times,
I was very pleased. David Sugar fixed my steering trouble
that was overlooked by another shop in town. He performed
a thorough 4 wheel alignment and explained the process and
the difficulty in doing this job well. No complaints here.
During the second visit, he replaced my timing chain rails.
Shop rate is $60/hour currently. I had him check
the rear suspension bushings, (no charge to me), and he
said that they were not in need of repair. My car was in
and out in a timely fashion.
David is very personable and he owns an 87 420SEL himself
which had a blown engine due to timing chain rail failure.
Interesting, (but sad), to look at the damage. He has a
replacement engine installed and it is nearly ready to go.

I have no association with Landi except as a satisfied
customer.

[Edited by vrsmith on 03-21-2001 at 08:47 AM]

__________________
VR
1967 250SL
Reply With Quote
  #2  
Old 12-09-2001, 06:55 PM
domchang's Avatar
Registered User
 
Join Date: Sep 2001
Posts: 236
thanks for the recommendation, just dropped off my 87 560SL for some repairs...I hope he's as good as you make him out to be. He sure sounded like he knew Mercedes Benzs...
__________________
D. Chang
Network Integration Engineer
MCSE, CLP, CCNA
Reply With Quote
  #3  
Old 01-04-2002, 04:01 PM
domchang's Avatar
Registered User
 
Join Date: Sep 2001
Posts: 236
just wanted to follow up re my previous posting, got the car back on time and it runs marvelously, everything that needed fixing was fixed except for the oil pan gasket which will require 16hrs of labor according to the mechanic so am holding off on that since its just some oil seepage.

he also recommended changing out the timing chain since it had stretched a bit (the car has 118k miles on it, so it's due). but he also said it could wait till I did the oil pan gasket to save on labor costs. He just mentioned to keep it under 4000 rpm which I do with my driving habits anyway.

Both guys came across as very knowledgeable and communicated very well re each item to be fixed.

They'd forgotten to replace the lightbulbs in my instrument cluster (one had burned out), they did not charge me for it though and when I mentioned it to them, they had me bring the car in, did the work while I waited, no charge....

I think I've found myself a reliable mercedes mechanic!

dom
__________________
D. Chang
Network Integration Engineer
MCSE, CLP, CCNA
Reply With Quote
  #4  
Old 04-10-2003, 12:11 AM
Automotive Restoration
 
Join Date: Feb 2003
Location: Steamboat Springs, CO
Posts: 186
Looking for a shop in Colorado Springs

Need to find a place for potential inspection of a 4.5.
__________________
Francis E. Abate
Automotive Restoration & Preservation
Sheet metal, trim and upholstery
Reply With Quote
  #5  
Old 04-26-2003, 03:18 PM
Registered User
 
Join Date: Apr 2001
Location: Los Angeles CA
Posts: 154
check out Concours Cars in Old Colorado City. It's a Bosch authorized repair facility and they know MB inside out.
__________________
Richard Detoy
'84 300SD
'76 Moto Guzzi 850 Le Mans
Reply With Quote
  #6  
Old 04-27-2003, 10:57 PM
Automotive Restoration
 
Join Date: Feb 2003
Location: Steamboat Springs, CO
Posts: 186
Thanks, I'll do that.!
__________________
Francis E. Abate
Automotive Restoration & Preservation
Sheet metal, trim and upholstery
Reply With Quote
  #7  
Old 03-02-2004, 11:10 PM
domchang's Avatar
Registered User
 
Join Date: Sep 2001
Posts: 236
Landi's out of business

sorry to report this indy shop from whom I'd gotten great work done on my 560SL is out of business as of the beginning of 2004....dammit.
__________________
D. Chang
Network Integration Engineer
MCSE, CLP, CCNA
Reply With Quote
  #8  
Old 03-03-2004, 10:05 AM
DanielG's Avatar
Registered User
 
Join Date: Oct 2002
Location: Deerfield, Illinois
Posts: 349
Hey Dom -- sorry about your loss -- a good shop is hard to find -- and raises the point that we should, on occassion, put in a plug here in this forum for our favorite shops -- even if we have done it before -- so that they can continue to thrive -- its good for the shop and good for us.
__________________
Dan

1986 560SL (52.5k miles) sold 11/24/04

1987 560sl (55.6k miles)
Reply With Quote
  #9  
Old 03-15-2004, 05:52 PM
Registered User
 
Join Date: Jul 2003
Location: Colorado
Posts: 22
Northern Colorado, Fort Collins Foreign Car Repair

Just an unprompted plug here for my shop at Fort Collins Foreign Car Repair (Bill and Marty). I really don't know that they particularly specialize in Mercedes, but I can say that I've always been pleased with their diagnosis, recommendations, work, etc. on my own daily driver (1988 300 SEL). After a few negative experiences elsewhere, I didn't think I'd ever fully trust a mechanic again. I thought for sure I was facing a full valve job to address major oil burning, but they offered a staged approach to see if perhaps we could resolve the issue with something less expensive... and they were right. I wouldn't have known the difference so I really appreciate their honesty.
Reply With Quote
  #10  
Old 05-12-2005, 01:46 AM
Breckman99's Avatar
TURBODIESEL
 
Join Date: Jan 2002
Location: Boulder, CO
Posts: 541
German Auto in Denver, CO A++++++

Best MB shop in DENVER, CO.
German Auto
Off of Colfax and Simms
Very helpful and fast. THANK YOU!!!
__________________
1983 Mercedes 300SD
1987 Mercedes 300SDL
2001 VW Passat 2.8 AWD
2007 OM642 Jeep WK 4x4

Reply With Quote
  #11  
Old 05-14-2005, 03:54 PM
MB WRENCH.
 
Join Date: May 2005
Location: OREGON
Posts: 137
I gotta disagree :

I know the people at Littleton MB, used to work at Murray Motors in Denver,
know the people at Glauser outside Boulder, and the best MB shop in Denver is none of thee above.

Startech, off of Sante Fe is the best MB place in town.
Reply With Quote
  #12  
Old 09-07-2005, 04:40 PM
ched454's Avatar
Registered User
 
Join Date: Aug 2005
Location: Westminster, Colorado
Posts: 170
How about Al's ******** on Dahlia near 1-25 and Evans?
__________________
2001 E320
1991 350SD 265,000 - SOLD
2000 VW Beetle 1.8Turbo - restored
1997 E320 - SOLD
1988 190E - SOLD
1969 Mustang - SOLD
Reply With Quote
  #13  
Old 10-15-2005, 11:54 PM
novaalison23
 
Join Date: May 2005
Location: colorado
Posts: 117
Quote:
Originally Posted by Melcher
I gotta disagree :

I know the people at Littleton MB, used to work at Murray Motors in Denver,
know the people at Glauser outside Boulder, and the best MB shop in Denver is none of thee above.

Startech, off of Sante Fe is the best MB place in town.

Actually, I think Glauser is one of the best places I have ever been for any car repairs, a bit more that the place down the street, but they treat me like a human, and not "another girl who knows nothing"
__________________
Kenni
'85 300D turbo
208K miles
FOR SALE (kinda)
Reply With Quote
  #14  
Old 11-05-2005, 08:55 AM
Benzadmiral's Avatar
Chief Enforcement Agent
 
Join Date: Jul 2004
Location: New Orleans, LA
Posts: 340
Thumbs up Denver shops

Quote:
Originally Posted by Melcher
I gotta disagree :

I know the people at Littleton MB, used to work at Murray Motors in Denver,
know the people at Glauser outside Boulder, and the best MB shop in Denver is none of thee above.

Startech, off of Sante Fe is the best MB place in town.
I lived in Denver for more than 4 years, bought my MBs at Valley Motors on Broadway, tried several shops. Sandor at Star Tech was always the best. After I'd been bringing him my 420SEL for a while, he offered me a deal. If I made an appointment with him, usually on a Tues. or Thursday about 4:00, he would clear me a little space in the shop and have one of his techs extract the oil with the electric machine. Meanwhile I would change the filter (which naturally I bought from him!), and then put in my own oil. No charge. Excellent customer relations.

I left town before he opened his new shop on Santa Fe. What's it like?

I tried Al's ******** near I-25 and Evans, and I always felt he had a doctor's attitude, i.e., "I know what's best for your car and you don't." I could never get an estimate out of him, and the work always took longer than it should. (On the other hand, when I brought my 420SEL to him for squeaking brakes, he worked with me, trying different brands of pads until it was right.)
__________________
* *
-- Paul W. (The Benzadmiral)
('03 Buick Park Avenue, charcoal/cream)
Formerly:
'97 C230, smoke silver/parchment; '86 420SEL, anthracite/light grey; '84 280CE (W123), dark blue/palomino
Reply With Quote
  #15  
Old 11-07-2005, 01:57 AM
Breckman99's Avatar
TURBODIESEL
 
Join Date: Jan 2002
Location: Boulder, CO
Posts: 541
Well there is a reason I recommend them, please see this thread for the story:
Amazing experiance at MB shop in Denver CO.
I haven't dealt with the shops you speak of, but I have dealt with allot of shops in my day and never seen anything quite like this! Thank you for the recommendations gentlemen.

__________________
1983 Mercedes 300SD
1987 Mercedes 300SDL
2001 VW Passat 2.8 AWD
2007 OM642 Jeep WK 4x4

Reply With Quote
Reply

Bookmarks


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On




All times are GMT -4. The time now is 03:46 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2024 Pelican Parts, LLC - Posts may be archived for display on the Peach Parts or Pelican Parts Website -    DMCA Registered Agent Contact Page