PeachParts Mercedes-Benz Forum

PeachParts Mercedes-Benz Forum (http://www.peachparts.com/shopforum/)
-   Mercedes-Benz Performance Paddock (http://www.peachparts.com/shopforum/mercedes-benz-performance-paddock/)
-   -   Lotec turbo? (http://www.peachparts.com/shopforum/mercedes-benz-performance-paddock/1004-lotec-turbo.html)

G-Man 01-05-2000 01:43 PM

My 300GE is too slow even though it is blessed with a 5sp manual transmission. While rummaging through old issues of Car and Driver I found a test of a 300CE with a turbo setup including an intercooler. The issue I believe was 11/88. This is the same M103 as in my G-Wagen. They claimed 10.9 psi of boost produced 350hp with no internal modifications. The car ran 0-60 in 5.0 sec. I don't need 350hp and I would question the cars longevity, but I think maybe 6psi or so would give me 230-250 hp. I know the right way is to go see Renntech for a 3.6 conversion but 15 grand seems like a lot. Does anybody know if this tuner (Lotec) still exists? Is there a relatively inexpensive way to get some power from the M103. Maybe a supercharger for around $5000.

------------------
90 300GE 5sp
95 740iL

Benzmac 01-05-2000 08:31 PM

I have seen turbo kits for the M103 that are pretty cool, but pricey. They run about 10G installed. Ouch. But alot of power.


------------------
Benzmac:
1981 280GE SWB
1987 16V
ASE CERTIFIED MASTER AUTO TECHNICIAN
SERVICE MANAGER FOR 14 BAY FACILITY
MERCEDES SPECIALIST 8 YRS
PARTNER IN MERCEDESSHOP.COM



G-Man 01-06-2000 02:12 PM

For that much I would go with the base 3.6 conversion from Renntech. That would give 225hp up from 177 and they claim strong low end torque. Maybe I should just give up on a cheap fix for my expensive car. For 14k I can get the stage two and 255hp. This avoids the heat and durability concerns associated with turbos. I still think a vortech supercharger and a little fuel enrichment would be ideal. If anyone has seen a setup like this please let me know.

------------------
90 300GE 5sp
95 740iL

G-Man 01-06-2000 04:45 PM

Benzmac, I found a turbo kit but its REALLY SPENDY ! $16500 . They claim 300hp from 8psi with a liquid aftercooler. The outfit is Eurotech in Las Vegas NV. I called looking for someone to do a supercharger. It would be a one-of deal and even more expensive OUCH. Brabus also does the 3.6 conversion but only offers a 1 yr warranty as opposed to Renntechs 3 yr . Cost is comparable, Renntech is in Florida and Brabus in Calif. so take your pick. Looks like I'll save a few more sheckels and go see Renntech for a new motor next spring. By the way all of these mods apply to M103 motors whether its a 190E 2.6 or a 300E. This concludes my quest for power.

------------------
90 300GE 5sp
95 740iL

russla 01-10-2000 07:49 AM

I came across a company in the UK, making a blower for 103 motors,

I believe their name is RSC and the number is +44 181 800 3355

I think it was in the neighborhood of £1800, which is roughly US $2700

Kind Regards

Russ

Lee Scheeler 01-11-2000 03:01 PM

Take it they don't have a website or email? BTW, any idea if they have forced induction kits for other motors? (M119, M104, etc)

Thanks...Lee


All times are GMT -4. The time now is 08:42 PM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2024 Pelican Parts, LLC - Posts may be archived for display on the Peach Parts or Pelican Parts Website