I would like to know if its possible or has anyone done a complete engine n tranny swap from a C-class 230 Kompressor into a 190e.

concerns me is the electrical system and also connections for the speedometer,techmeter, etc.

hope someone has done this swap before and could share some info.

thanks

alex

You would need a Motec or similar computer and not all of the electronic gizmos would work. The two words that come to mind is "Cost Prohibative"

__________________
http://www.benzworld.org/forums/imag...e_steering.gif
1998 C43 ///AMG
1999 C230 Custom 5-Speed Manual

yeah you'll need a stand alone. and why do it on a 16v? buy a 8v-er if you're going to do all of that work. 16v's have lots of potential, no need to take it out (unless u blew it)