|
|
|
#1
|
|||
|
|||
AN fittings for fuel lines, etc
I'm looking at getting some AN fittings and braided hose for the plumbing on my 190e 5.6 swap project. So I'm wondering what you all think about sizing. What I need to find is:
1) AN size for fuel hose, power steering fluid hose, and transmission oil cooler hose. 2) Anyone know offhand what the thread size is for the connectors of these circuits? I think the fuel lines at least have 12mmx1.5 fittings, but I'm not sure about the others and I need to order adapters. Thanks in advance for any help!
__________________
1999 C43 AMG ~~~ 744 on black, mostly stock 1991 190e 2.6 ~~~ m117 5.6 project car |
#2
|
||||
|
||||
Quote:
If you goiging to use some stock lines (8mm) too wich is easy make up to 600hp then you can use AN6. Stock fittings are M14 and AN6 is 9/16-18 UNF and the hose is 8,75 x 13,89 For transmission oil you can use AN8 or AN10
__________________
MB 300E 24v Turbo MS3X TURBOCHARGE YOUR MERCEDES www.turbobandit.com My band! https://www.facebook.com/pages/Turbobandit/135610656626424?fref=ts |
#3
|
|||
|
|||
Awesome, just what I needed! Are both fuel line fittings the same (send and return)? Also, do you know what size the radiator trans oil cooler fittings are? Also, what do you mean by the hose is 8.75 x 13.89? Thanks!
__________________
1999 C43 AMG ~~~ 744 on black, mostly stock 1991 190e 2.6 ~~~ m117 5.6 project car |
#4
|
|||
|
|||
Did you ever get this complete? I'm trying to do the same thing with my Transmission Coolant lines as they need replaced anyway. But i'm still now sure what size fittings I should get.
|
Bookmarks |
|
|