|
|
|
#1
|
|||
|
|||
MegaSquirt & Motec
This area of the forum may be as good a place for these as the Parts for sale area.
FOR SALE 1. A New MegaSquirt package of: MegaSquirt II w/PCB3 - Assembled Unit JimStim MegaSquirt Stimulator w/ Wheel Simulator - Assembled 12' MegaSquirt Wiring Harness MegaSquirt Tuning Cable When purchased from DIY AutoTune $558. $400. ? 2. A Used Motec M-4 with New Harness & Comm Cable Motec M-4 ECU with a new unterminated 10 foot loom (harness), and communications cable. All options have been enabled with the exception of telemetry. The following is the description of options from the Motec catalog: 26004 ADVANCED Tuning & Logging (512K) = PRO * Logging (512k), Fuel and Ignition Individual Cylinder 3D Tables, Fuel Timing 3D Table, Start or End of Injection, Fuel Second Load Table, Ignition Accel/Decel, Ignition Dwell Table, Closedloop Wideband Lambda Control (requires 26006 or external meter), Gear Change Ignition Cut, Overrun Boost Enhancement (Anti Lag), Ground Speed Limiting, Traction Control & Launch Control 26005 LOGGING (512K) (included as part of 26004) * Allows logging of the ECU sensors and operating parameters to the internal data logging memory. The logged data may then be analyzed by the MoTeC i2 Standard Software. 26006 SINGLE WIDEBAND LAMBDA * Allows Wideband Lambda (Air Fuel Ratio) measurement, which may be used for data logging or closed loop control of the Air Fuel Ratio. The measurement is fully temperature compensated and will accurately measure ratios of 0.75 to 1.2 Lambda (11:1 to 18:1) when used with the MoTeC Wideband exhaust gas sensor. (Advanced Functions also required for Wideband closed loop Lambda control.) $1100. ? |
#2
|
|||
|
|||
nice price on the MSII system, I wish I already hadnt bought my un assembled unit as its been 1 year 1\4 done haha.
any other parts for sale like m104 trigger wheel and sensor jig?
__________________
http://www.pbase.com/image/21611314.jpg |
#3
|
|||
|
|||
Bump up.
Megasquirt package sold. Last edited by Frank Reiner; 12-31-2012 at 01:31 PM. |
#4
|
||||
|
||||
PM'd you
__________________
"Understeer is when you hit the wall with the front of the car, Oversteer is when you hit the wall with the rear of the car, Horsepower is how fast you hit the wall, Torque is how far you take the wall with you." |
Bookmarks |
Thread Tools | |
Display Modes | |
|
|