|
|
|
#1
|
|||
|
|||
W210 aftermarket seat rails?
Hi all,
I have a W210 E300 turbodiesel estate, I have fully manual seats (rather than the heavy and complex electric seats). I will be looking to reduce some weight in the car but won't be stripping the car out fully for racing so I will be only doing the following: Rear seat removal Boot seat removal Tool kit removal Spare wheel removal De-backbox I know that the stock manual seats should be much lighter than the electric leather seats I know that they are still quite heavy. I actually found that just the seat cushion bases weigh around 20kgs. My question is around the front seats though, they can easily unbolt with the 4 simple bolts and electrical connector (guessing for the seat sensor and belt alert). My issue is that the bottom of the seat belt actually attaches to the seat itself - are there any aftermarket seat rails that you can attach the standard seat belts to? I don't mind removing some of the simple parts such as the spare wheel when I do go drag racing with the car, however it would be a bit of a faff to keep taking the seat in and out of the car. This is why I am thinking of upgrading to lighter seats and keep them bolted in etc.
__________________
UK spec Mercedes W210 E300 Turbodiesel wagon - OM606.962 with 722.6 transmission - rust free! |
#2
|
|||
|
|||
Probably not, seat rails for built in belts are much stronger than floor mounted belts.
|
Bookmarks |
|
|