|
|
|
#1
|
|||
|
|||
Water to Air Intercooler routing
Hi all,
Please see the diagram and confirm the routing for the w/a system is correct. Thanks, Rock |
#2
|
|||
|
|||
More or less, that will get it done. Be mindful of air pockets when building your system.
__________________
90 300TE 4-M Turbo 103, T3/T04E 50 trim T04B cover .60 AR Stage 3 turbine .63 AR A2W I/C, 40 LB/HR MS2E, 60-2 Direct Coil Control 3" Exh, AEM W/B O2 Underdrive Alt. and P/S Pulleys, Vented Rear Discs, .034 Booster. 3.07 diffs 1st Gear Start 90 300CE 104.980 Milled & ported head, 10.3:1 compression 197° intake cam w/20° advancer Tuned CIS ECU 4° ignition advance PCS TCM2000, built 722.6 600W networked suction fan Sportline sway bars V8 rear subframe, Quaife ATB 3.06 diff |
#3
|
|||
|
|||
I would run the expansion tank in series with the hot water line.
Also, might be worth installing the cooler on a slight angle, and drill and tap in an air bleed line. |
Bookmarks |
|
|