|
|
|
#1
|
|||
|
|||
Anybody know this 240??
Looking for the owner or info.. What they used or did to lower it and wheel /tire size....
Sent from my SM-G892A using Tapatalk
__________________
Brad Bunch of old metal, trying to keep it on the road.... |
#2
|
|||
|
|||
that looks about like the same hight as the set of H&R springs i was running for a bit. as for the wheels maybe 16 or 17's. i ended up swapping them out for w126 springs cut to a slightly higher ride hight i found the H&R springs to be to soft for my taste they were basically the same as stock but lower. the w126 springs are much stiffer which helps me since i live in the mountains. if you are interested i still have the springs and the billstein part numbers for the B8 shocks with the lowered valving to work with the springs.
__________________
1985 300D om617: 8mm M pump 175cc 5200rpm, holset he221w @ 30psi, large A2W ic, compounds on the way. KD9AFT A&P |
#3
|
|||
|
|||
Quote:
Sent from my SM-G892A using Tapatalk
__________________
Brad Bunch of old metal, trying to keep it on the road.... |
Bookmarks |
|
|