and yes i have the angled AMG tips...

ashman has the non-angled rectangle tips...

hey neil,
no pic?

what kind of benzie do you have?

Ops, sorry sticky fingers. I've got a 1991 W124 300CE-24 with sportline suspension and a five speed box. Rated at 230bhp.

The first picture was too big. I've made it smaller.

Still too big. Let's see if this works. . . . . . .

wow you've got the 5 spd. manual?

me and ashman are totally lusting after that car's tranny....
lol

yeah. I like it too. Don't need to change up to 5th until 120mph!! Gas is pretty expensive over here so I don't do it much. It has an interesting layout. first gear is bottom left as opposed to top left which is the norm for sticks.

5-speed 300E-24's and 300CE-24's are pretty common in Indonesia. In fact Automatic is considered an option and not many people want it simply because it's more money....and almost every car in Indonesia is a stick anyway...

Very true. In Europe that model and most smaller ones come as standard in manual. Except for the UK. manuals are rare over 2 liter engine capacity.

Mine is LHD bought in germany.

Hey guys! looks like I can't get hold of the bracket to fit the Arospeed rear muffler to my car - asked several shops over here and ll have said it would be a special. Any ideas where I could buy the bracket to fit? :)

hey neil,
sounds like they're trying to get more money from you...
there is no "special" bracket persay..
all it is is a rod that has been bent and then welded to the top of your muffler which is then connected to the chassis of your car....

if you need it, i will post some pics of the under mounting portion and bracket, which should be supplied by any pro muffler shop...

:p Thanks very much for the offer. I'm taking the car to a few more shops tomorrow to see what they say - will let you know what they say later on in the week.

Sweet exhaust. That is the exact same one that I got on mine. I had it done about a month ago. I trimmed the thin black plastic under my bumper so it sits up higher. It looks stock and and you can only see the tips. Be careful though, I wasnt used to having an exhast that sticks out any from my car and I burned the crap out of my leg after a 5 hour trip back from Illinois, ouch!



Neil, when you take the exhaust to the shop to be put on. They use hangers that they weld onto the side of the exhaust to hold it on. Every muffler shop does this, with any aftermarket universal muffler.

;) Thanks for bothboth pieces of advice.

Where did you get that muffler, becuase I want one man. If you could help me out it would be appreciated.

it's an arospeed muffler
you can get them online.

What website do i go to to get it.