|
|
|
#1
|
|||
|
|||
camber kit 4 a 16v
if anyone can help with obtaining a camber kit for 16v i would greatly appreciate it. i need to get one by the latest, september cuz im takin the car to willow springs. thanks
Ryan
__________________
http://www.190revolution.net/mods/tj...gs/ryansig.jpg |
#2
|
|||
|
|||
Do you want a camber kit for the front or the rear? A guy on benzsport.com has one for sale.
Austin
__________________
Current Stable: 1994 S500 v140, 210k miles, white with grey. Former Mercedes in the Stable: 1983 300CD Turbo diesel 515k mi sold (rumor has it, that it has 750k miles on it now) 1984 300CD Turbo Diesel 150 k mi sold 1982 300D Turbo Diesel 225 sold 1987 300D Turbo Diesel 255k mi sold 1988 300 CE AMG Hammer 15k mi sold 1986 "300E" Amg Hammer 88k mi sold (it was really a 200, not even an E (124.020) 1992 500E 156k mi sold etc. |
#3
|
|||
|
|||
i talked to JRE on Benzsport, and it looks like i jus need the rear, but if its cheaper to get both then i'll do that.
Ryan
__________________
http://www.190revolution.net/mods/tj...gs/ryansig.jpg |
#4
|
|||
|
|||
Rear Camber kits
These are available from Truechoice Motorsports in Ohio.
tel. 614-876-3483. Truechoice is the importer for K-Mac which comes from Australia. For the rear you would need kit#502026G and consists of four adjustable urethane bushings to replace the OE rubber garbage. Good luck.... Tobias MB 190/5.6 |
#5
|
|||
|
|||
Rear Camber W201 W124
I am working on a rear camber kit for the rear of W201 & W124 cars. It will use rubber bushings. This is mostly for street lowered cars with some track use. The rubber compound for the bushing will be stiffer than stock. I will keep everyone posted.
__________________
WARNING: Bastard Mercedes Builder/Tuner Sorry if I don't answer your email or questions I don't check here too often. I am normally on the 190revolution.net board. Thanks |
#6
|
||||
|
||||
Definately keep us posted speedtek. It amazes me that in todays modding climate that there is only one company that makes a camber kit for mercedes. Somebody explain that to me Hope you don't run into any patent issues
|
Bookmarks |
|
|