|
|
|
#1
|
|||
|
|||
aftermarket rods
Can after market rods with a smaller journal diameter be used so the crank can be offset stroked longer. Is there a limitation on the crank as long as the rods are rated for the rpm, hp, and torque being delivered. Your inputs would be appreciated.
|
#2
|
|||
|
|||
rods
depends on the weigh of the pistons, length of the rod. availability of bearings. yes you can offset/undersize the crank to stroke it and make custom rods. Oh yeah and the HP factor.
|
Bookmarks |
|
|