Parts Catalog Accessories Catalog How To Articles Tech Forums
Call Pelican Parts at 888-280-7799
Shopping Cart Cart | Project List | Order Status | Help

Go Back   PeachParts Mercedes-Benz Forum > Mercedes-Benz Tech Information and Support > Mercedes-Benz Performance Paddock

LinkBack Thread Tools Display Modes
Old 09-12-2002, 09:40 PM
Registered User
Join Date: Aug 2002
Posts: 9
What are results of larger sway-bars?

Own a 1993 300E. Would like to reduce the roll of the car in corners without excessively changing the ride quality over varying surfaces, e.g. railroad tracks. Am considering adding the Sportline sway-bars that Mercedes Shop sells with their Sportline Kit. While the result of putting larger sway-bars on the car seems obvious, just wanted to confirm such with some folks on this forum. Would appreciate comments as to whether putting larger sway-bars on the car will reduce the roll of the car through turns without changing the height of the car nor any other driving characteristic(s). If the larger sway-bars will change some other driving characteristic(s), what would they be? TG
Reply With Quote
Old 09-12-2002, 10:50 PM
Registered User
Join Date: Aug 1999
Location: ajax, ontario, canada
Posts: 773
larger sway bars have no effect on pairs of wheels that are moving up and down at the same time, e.g., while moving over railroad tracks at the same time. And unlike stiffer front springs, swaybars do not have any effect on brake dive.

the obvious effect of sway bars, as you already know, is to increase roll resistance.

What is not so obvious is that the tuning of the front vs rear swaybars (among other things) has a big effect on handling:

- A stiff front swaybar tends to increase understeer (Porsche 911s have stiff front swaybars to compensate for the rear's tendency to oversteer; that's why you see pictures of these cars doing extreme cornering with the inside front wheel lifted).

-To reduce understeer, one would increase the stiffness of the rear swaybar. This is usually done for example on front-wheel-drive cars, and it is not uncommon to see them lifting the inside rear wheel during hard cornering.

I believe that swaybar tuning for a front-engine, rear-drive car is tricky: such a car would normally understeer because of the heavy front, and one would normally increase the rear swaybar stiffness to counteract this. But using a stiff rear swaybar would reduce the grip of the inside driven wheel during hard cornering while accelerating.

While one would tend to use stiffer swaybars for performance-oriented driving, there is a point of diminishing returns: for example, if the swaybars were so stiff that the left wheels do not move up and down relative to the right ones, during a hard lefthand corner, the vehicle would still roll because of the laws of physics, but the left wheels would completely lift off the pavement (or just reach that point when they are about to do so, at which point they lose all grip), and all your grip will be limited to your right tires.

on F1 cars for example, they reduce rollbar stiffness when it is raining, to increase mechanical grip. And they vary the front vs rear stiffness as they use up fuel.
Reply With Quote
Old 09-13-2002, 03:19 AM
Senior Canadian Member
Join Date: Jul 2000
Location: British Columbia, Canada
Posts: 827
Yep...that about sums it up.
'94 W124.036 249/040 leder; 8.25x17 EvoIIs
'93 W124.036 199/040 leder; 8.25x17 EvoIIs, up in flames...LITERALLY!
'93 W124.036 481/040 leder; euro delivery; 8.25x17 EvoIIs
'88 R107.048 441/409 leder; Euro lights
'87 W201.034 199/040 leder; Euro lights; EvoII brakes; 8x16 EvoIs - soon: 500E rear brakes
'70 R113.044 050/526; factory alloys; Euro lights
Reply With Quote
Old 09-13-2002, 09:15 AM
Registered User
Join Date: Aug 2002
Posts: 9
Thanks much. TG
Reply With Quote
Old 09-15-2002, 08:28 AM
Registered User
Join Date: Jun 2001
Location: Omaha, NE
Posts: 962
From what I've heard, the trick is to only go up one notch in diameter/stiffness -- i.e., if you have a 300E, go to 400E sway bars. I have a 400E and went with 500E sway bars and they do indeed reduce body roll significantly, and the ride quality seems better, if anything ...
'93 400E
Reply With Quote
Old 09-16-2002, 01:13 PM
Registered User
Join Date: Apr 1999
Posts: 2,633
Excellent write-up. I would add that when upgrading swaybars, to upgrade both the front & rear since they work together as a system.

Case in point- I upgraded the front swaybar of the wagon to a SportLine, and left the rear stock. Understeer!

Upgraded the rear to a 500E rear swaybar (about 1.5mm thicker than SportLine rear), and now the car behaves more neutral (less understeer).

:-) neil
1988 360TE AMG
1993 500E
Reply With Quote


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are On
Pingbacks are On
Refbacks are On

All times are GMT -4. The time now is 12:01 AM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2019, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2018 Pelican Parts, LLC - Posts may be archived for display on the Peach Parts or Pelican Parts Website -    DMCA Registered Agent Contact Page