PeachParts Mercedes-Benz Forum

PeachParts Mercedes-Benz Forum (
-   Mercedes-Benz Performance Paddock (
-   -   124 Spring pad recommendation (

haasman 09-13-2002 11:45 AM

124 Susp. Experts: Spring pad recommendation
My '91 300E sits too high: It has four-bump pads in the front and three in rear. It is stock except for front and rear Bilstein HDs.

I don't want to install different springs; I just want it to be lowered a bit.

It is a family car and often has four-five people in it and occasionally luggage as well. I do want it to be slightly higher in the rear to accommodate the occasional load described above.

What would you recommend?

Thank you in advance:)

el presidente 09-13-2002 11:54 AM

I have a '91 300CE and had the exact same setup as you do.

I installed one bump all around, but also did the sportline upgrade at the same time.

Hope you get the results you are looking for:)

haasman 09-13-2002 12:40 PM

Thanks for the reply

All times are GMT -4. The time now is 01:11 AM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2019, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2018 Pelican Parts, LLC - Posts may be archived for display on the Peach Parts or Pelican Parts Website