|
|
|
#1
|
||||
|
||||
124 Susp. Experts: Spring pad recommendation
My '91 300E sits too high: It has four-bump pads in the front and three in rear. It is stock except for front and rear Bilstein HDs.
I don't want to install different springs; I just want it to be lowered a bit. It is a family car and often has four-five people in it and occasionally luggage as well. I do want it to be slightly higher in the rear to accommodate the occasional load described above. What would you recommend? Thank you in advance
__________________
'03 E320 Wagon-Sold '95 E320 Wagon-Went to Ex '93 190E 2.6-Wrecked '91 300E-Went to Ex '65 911 Coupe (#302580) Last edited by haasman; 09-13-2002 at 06:58 PM. |
#2
|
|||
|
|||
I have a '91 300CE and had the exact same setup as you do.
I installed one bump all around, but also did the sportline upgrade at the same time. Hope you get the results you are looking for |
#3
|
||||
|
||||
Thanks for the reply
__________________
'03 E320 Wagon-Sold '95 E320 Wagon-Went to Ex '93 190E 2.6-Wrecked '91 300E-Went to Ex '65 911 Coupe (#302580) |
Bookmarks |
|
|