Help with wheel off-set for 500E staggered set-up
I am looking to buy a set of SIZE: 18" x 8.5" & 18 x 10" wheels with an off-set of 35mm front & 19mm rear. Tires are 245/40/18 & 275/35/18. Will that wheel/tire combo fit my '93 500E...?
Thanks for any advice! |
High 20's (28-29) in the rear would be perfect :) I run that same setup.
|
Shanta, you're running 10" rear rims with ET28 offset? Didn't think that was possible on the W124036!!
Thaas....you can also go with the ET19 and 10" rear rims. I have that set up on need2speed (note the picture below). Further reassurance comes from BBS and OZ, who offered that setup for the 500E. Might be a problem if you install lowering springs though.... You might want to consider a 17" setup for two reasons: less harsh ride, and consistent with factory optional size when car was new. Depends if you want to stay true to the original style of the car or "modernize". FWIW, I think its a losing battle to try and keep up with the latest auto fashions when you have a real classic ;) |
Thank-you all for your input!!!
.
|
All times are GMT -4. The time now is 05:58 AM. |
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2024 Pelican Parts, LLC - Posts may be archived for display on the Peach Parts or Pelican Parts Website