|
|
|
#1
|
|||
|
|||
Changed fmous R16 in 190E2.3
Hello all.
I have found what I suppose is the famous R16 resistor in my 190E 2.3 (1992). If I am not wrong, the setting is that number that faces to the front of the car (horizontally). I have checked this and the setting was about 900 ohms (the lower resistance value), corresponding to the "7" position. I have measured the other resistances, and as you decrease the number marked in the case, the resistance increases. The "1" corresponds to about 12 KOhms. Does this sound to anybody? I have changed the setting to "1" and run a few turns and I must say that I haven't noticed anything, but will see in a road trip. Has anyone changed the value? Was was the original one in this model, also "7"? I am running 95 octane fuel, in Spain. Any comments on this issue will be very appreciated. Sergio |
Bookmarks |
|
|